铁头 Titla Hydra Arm Mini Pro 套装 重型车拍专业摄像机 挂载装置 HDA-T08-A-V

• [CAMERA CAR CRANE] Achieve Complex Vehicle Mounted Cinematography
• [UNIVERSAL] Mounting Hardware Accommodates Most Vehicles
• [COMPATIBLE] with the DJI RS2, RS3 Pro, Ronin 4D, Movi Pro, Ronin MX and More
• [COUNTERWEIGHT-LESS] Design Requires No Additional Weights and Supports 360 Degree Rotation
• [PORTABLE DESIGN] Makes the System Easy to Transport via an SUV or Commercial Airline

Hydra-Arm Mini is the ultimate cinema camera car crane. Complex vehicle mounted cinematography is now more within reach for filmmakers than ever before.

The system is portable, lightweight, and relatively easy to use for filming vehicles from multiple angles while in movement.

Designed specifically for the RS 3 PRO and RS 2, but compatible with a range of gimbals and camera systems such as the Ronin 4D, Ronin MX, Freefly Movi Pro.

The lightweight, counterweight-free design makes the system faster to set up and safer to operate as users will only need to focus on one end of the arm at any given time.

The Pro Kit includes suction cups, speed rail and ratchet straps allow you to mount the system easily to most vehicles that can support the 176lb weight of the arm not including a gimbal or camera.

The Basic Kit will be available in the near future without mounting hardware for users who already own 50mm Speed Rail or who are looking to build their own permanent mount.

There are optional suction cup kits for vehicles with various sized sunroofs including panoramic sunroofs and an optional Electronic Kit that allows users to monitor the suction cup pressure remotely for added safety.

The Shock Absorbing Arm helps stabilize the gimbal when operating on uneven surfaces and can be adjusted for various payloads.

The Shock Absorbing Head of the arm can be individually adjusted for both the horizontal and vertical axis.

The included Controller connects via a wired connection ensuring reliable communication to the arm.

The Controller gives the operator access to various options for the tilt and pan axis, including speed, dampening, and range of motion limitations for each axis individually.

Custom user settings allow the operator to select from a range of configurations so that they can operate in a way that is most comfortable to them.

Pro Mode is an expanded control option that allows users to control the Hydra Arm Mini and an RS2/RS3 Pro Gimbal simultaneously through the controller.

Please note this is not recommended for most shooting situations and is only advised with proper precautions.

The system can support speeds of up to 74 mph (120 km/h) in ideal conditions, but we recommend keeping speeds at or below 37 mph (60km/h) especially when using heavier cameras or lighter gimbals.

The primary factors that will impact operating speeds are camera weight, gimbal strength, and weather conditions.

Other gimbals can be used as well as long as they can be mounted via 1/4″-20 threads, powered via V-Mount batteries and stay within the 22lb weight limit.

The system includes a V-Mount Battery Plate mounted on the end of the arm which allows users to power their gimbal via the included P-Tap to 2 Pin Power Cable or with a different cable if needed.

*An optional Gold Mount Battery Plate will be available as an additional purchase in the near future.*

The arm itself does not have any power or video passthrough features meaning you will need to utilize a wireless video transmitter (not included) and power your camera via onboard batteries or the Gold/V-Mount battery plate found on the arm.

To power the system, you will need a 220V 1800wH+ power source which is NOT INCLUDED.

We recommend the EcoFlow Delta and a 110 to 220V Power Converter (3000W+) if needed.

RETURN POLICY: This system  can be returned within 30 days, but will be subject to a 30% RESTOCKING FEE unless the system arrives defective.

Return shipping for non-defective units will not receive return labels. 

Pro Kit:

1：Pan Axis Module *1
2：50mm Speed Rail*2
3：Suction Cup Support Bracket*4
4：Monitor Support Bracket for The Front Passenger Seat*1
5：Suction Cup*2
6：Articulating Arm*2
7：Monitor Support Bracket for The Rear Passenger Seat*2
8：Tilt Axis Module*1
9：Cable Support Rod*2
10：Crane Arm Piece I*2
11：Crane Arm Piece II*1
12：Shock Absorbing Arm*1
13：Remote Control*1
14：Battery Plate for Hydra Arm Mini -V Mount*1
15：Power Supply Base Plate for DJI Ronin*1
16：220V Power Cable*1
17：Communication Cable*1
18：Support Cable*2
19：2-Pin to P-tap Power Cable*1
20：Ratchet Strap*2
21：Tool Set*1
22: Cable Support Bar*4

臂长为 152 英寸/ 387 厘米，较大高度为 177 英寸/ 450 厘米

较大有效载荷为 22.05 磅/10 千克（包括云台）

高/低角度速度：每1.7秒80°/移动角度速度：每6秒360°

净重：154磅/ 70公斤（近似重量，不包括云台或相机）

包装尺寸：39.37 英寸 x 19.69 英寸 x 15.75 英寸（100 厘米 x 50 厘米 x 40 厘米 |以三种包装发货）

电源要求：220V 1800wH+

（电源转换器：110V 至 220V 3000W+）

Arm length is 152in / 387cm, max height is 177in / 450cm

Maximum payload is 22.05lbs / 10kg (including gimbal)

Speed of high/low angle: 80° per 1.7 sec. / Speed of moving angle: 360° per 6 sec.

Net weight: 154lbs / 70kg (approximate weight, not including gimbal or camera)

Packing Dimensions: 39.37in x 19.69in x 15.75in (100cm x 50cm x 40cm | Ships in Three Packages)

Power Requirement: 220V 1800wH+

(Power Converter: 110v to 220V 3000W+)

该系统便携、轻便，并且相对易于使用，用于在运动中从多个角度拍摄车辆。

专为RS 3 PRO和RS 2设计，但与一系列云台和相机系统兼容，如Ronin 4D，Ronin MX，Freefly Movi Pro。

轻巧、无配重的设计使系统设置更快，操作更安全，因为用户在任何给定时间只需要专注于手臂的一端。

Pro 套件包括吸盘、速轨和棘轮带，可让您轻松地将系统安装到大多数可以支撑手臂 176 磅重量（不包括万向节或相机）的车辆上。

基本套件将在不久的将来提供，无需安装硬件，适用于已经拥有50 毫米高速铁路或希望构建自己的永久支架的用户。

有可选的吸盘套件，适用于具有各种尺寸天窗的车辆，包括全景天窗和可选的电子套件，允许用户远程监控吸盘压力以增加安全性。

减震臂有助于在不平坦的表面上操作时稳定云台，并可根据各种有效载荷进行调整。

手臂的减震头可以针对水平轴和垂直轴单独调节。

随附的控制器通过有线连接连接，确保与手臂的可靠通信。

控制器使操作员可以访问倾斜和平移轴的各种选项，包括每个轴的速度、阻尼和运动范围限制。

自定义用户设置允许操作员从一系列配置中进行选择，以便他们能够以较舒适的方式操作。

专业模式是一个扩展的控制选项，允许用户通过控制器同时控制Hydra Arm Mini和RS2 / RS3 Pro Gimbal。

请注意，对于大多数拍摄情况，不建议这样做，仅建议采取适当的预防措施。

在理想条件下，该系统可以支持高达 74 英里/小时（120 公里/小时）的速度，但我们建议将速度保持在 37 英里/小时（60 公里/小时）或以下，尤其是在使用较重的相机或较轻的云台时。

影响运行速度的主要因素是相机重量、云台强度和天气条件。

其他万向节也可以使用，只要它们可以通过 1/4“-20 螺纹安装，通过 V 型安装电池供电并保持在 22 磅的重量限制内。

该系统包括一个安装在臂末端的 V 型安装电池板，允许用户通过随附的 P-Tap 转 2 针电源线或在需要时使用其他电缆为其云台供电。

*可选的金卡口电池板将在不久的将来作为额外购买提供。

支架本身没有任何电源或视频直通功能，这意味着您需要使用无线视频发射器（未随附）并通过板载电池或手臂上的金/V 卡口电池板为相机供电。

要为系统供电，您需要一个不包括在内的 220V 1800wH+ 电源。

如果需要，我们建议使用EcoFlow Delta和110至220V电源转换器（3000W +）。

退货政策：此系统可以在 30 天内退货，但除非系统到达有缺陷，否则将收取 30% 的重新入库费。

无缺陷商品的退货运输将不会收到退货标签。