下载用于尼康产品的软件。若要查看说明、注意事项以及下载和安装指示说明,请单击“查看下载页面”。
选择您的操作系统。
该软件更新程序针对用户所有的以上产品（“相关产品”），并且仅在用户接受了下列协议时提供。选择“接受”并单击“下载”，即表示您接受该协议的条款和条件。开始下载之前请确保您已理解该协议条款。
| System requirements | Microsoft Windows 7 (all editions) |
| Download file | F-P90-V11W.exe (3.12 MB) Contains the following file: firmware.bin |
About this firmware update
This service provides the software for upgrading the COOLPIX P90 firmware to v1.1.
The following improvements have been made in version 1.1.
- An issue that, in some rare cases, prevented the accurate recording of images captured without interruption in single shooting mode with manual focus and Distortion control enabled has been resolved.
How to confirm your cameras current firmware version
If the latest firmware version is already installed on your P90, you need not proceed with download or installation of this Firmware Upgrade. The current firmware version can be verified from the Firmware version item in the camera's setup menu.
1. Turn on the camera.
2. Press the MENU button to display the menu screen.
3. Select the Setup Menu.
4. Select Firmware version from the setup menu.
5. The camera's firmware version will be displayed.
6. Turn off the camera.
Quick guide for download and installing this firmware update
Please note that when firmware is updated on the camera any images stored on the internal memory are erased. Please ensure that any images on the camera are copied to a computer or memory card before proceding with this update.
Power the camera from AC adapter unit or use a fully charged battery.
1. Click the link at the bottom of this page to download the .DMG file which contains the firmware.
2. Double-click the .DMG file to mount a disk image. This disk image will contain a folder, inside this folder is another folder called 'firmware'.
3. Use a card reader or similar device to copy the 'firmware' folder to a formatted SD memory card.
4. Insert the memory card containing the 'firmware' folder into the camera and turn on the camera.
5. Select Firmware version from the camera's setup menu and follow instructions displayed to upgrade the firmware.
6. After the upgrade is complete, turn the camera off and remove the memory card.
7. Access the Firmware version item in the camera's setup menu to confirm that the firmware has been upgraded.
For detailed instructions on how to install this firmware update click here.
| System requirements |
Mac OSX 10.1.5 - 10.6.4 1-GHz or better PowerPC G4 / PowerPC G5 / Intel Core series / Xeon series *SD Card reader or computer with built-in SD memory card slot required. |
| Download file | F-P90-V11M.dmg (3.83 MB) Contains the following file: firmware.bin |
PDF文件可使用免费的Adobe® Reader®软件进行查看。
下载Adobe® Reader®。